JVC SR-MV55U DVD VCR Combo User Manual


 
Filename [SR-MV45_55U_10Editing.fm]
Masterpage:Left+
48 EN
Page 48 January 10, 2007 1:18 pm
EDITING
Dubbing An Entire Disc
Because this unit includes both DVD deck and VCR deck, you can
easily use this unit for dubbing without connecting any other
equipment.
1 Load a disc you want to dub on the DVD deck, and a cassette
with the record safety tab intact on the VCR deck.
2 Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
3 Press REC MODE repeatedly to set the recording mode.
(pg. 36)
4 Press VCR}DVD to select the dubbing direction. The dubbing
(DUBB.) lamp lights up on the unit.
5 Press and hold DUBB. for more than 2 seconds to start the
dubbing. The dubbing (DUBB.) lamp blinks on the unit.
If the tape has not been rewound, the VCR deck rewinds the tape
automatically. When the VCR deck has finished rewinding, dubbing
begins automatically.
After dubbing is completed, the VCR deck rewinds the tape
automatically. Press VCR}DVD to turn off the dubbing (DUBB.)
lamp.
To stop dubbing, press 8.
NOTES:
It is not possible to start dubbing if the unit retains a memory of the
resume points. Press 8 twice to clear the resume points.
There may be a discrepancy of several seconds between where you
intend dubbing to start, and where it actually starts.
If you do not want the superimposed indication to be recorded, set
“SUPERIMPOSE” to “OFF” before dubbing. (pg. 59)
When the end of the tape is reached during dubbing, the tape is
ejected and both deck stops.
It may be impossible to dub a DVD-R or DVD-RW (Video mode) disc
recorded on the devices from other manufacturers or on a PC. In
such case, perform “Manual Dubbing (From DVD To VCR)”
(pg. 49).
It is not possible to perform other operations like Live Memory
Playback. Check the recorded program on the disc after dubbing.
Disc Dubbing (From DVD To VCR)
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/DBS/DVD switch to DVD.
1
4
7
2
5
8
0
3
6
9
REC MODE
8
VCR/DVD
8
VCR } DVD
DUBB.
VCR/DVD
DUBB. Lamp
SR-MV45_55US.book Page 48 Wednesday, January 10, 2007 1:18 PM