Filter
Top Products
9
7 Assembling the front speakers
Before assembling —
• Prepare a Phillips screwdriver (not supplied).
• Take care not to drop any component part while assembling;
otherwise, it may cause damage to the floor or injury.
Connecting the satellite (front,
center, surround) speakers
Assembled speakers
With stand: Refer to steps 1 to
3.
Without stand: Refer to steps
2 and 3.
Front speaker
(SP-THC43F)(2)
Base plate (2)Stand (2)
or
Speaker
Screw M5 x 40 mm (supplied)
1
Stand
2
When assembling a speaker without stand:
Speaker
Stand (or speaker
directly)*
Base plate
Screw M4 x 20 mm
(supplied)*
A: Use these screws (M4 x
45 mm) when assembling the
speaker with the base plate.
* When assembling the speaker with the base plate, use the
screws
A.
Black
Red
White
Black
3
You can route the speaker cord
by using speaker cord clamp
(supplied).
Connections
Do not connect the power cord until all other connections have been made.
EN_TH-C43[C]3.book Page 9 Tuesday, March 14, 2006 4:44 PM