JVC UXQD90S DVD Player User Manual


 
Introduction
31
(Continued)
Convenient Functions of the DVD Player
The audio of a DVD VIDEO and DVD AUDIO may
be recorded at a lower level (volume) than for
other types of disc. You can adjust the DVD level.
While a disc is being played back
Press .
• Each time you press , the display
changes as follows in the display win-
dow.
• Select the level while listening to the
sound played back.
NOTE
DVD level is effective only for playback of a DVD.
Even if the DVD level is changed, the output
level from the digital audio output terminal will not
be changed.
This function does not affect the recording sound
being recorded.
Some DVD AUDIO discs have a special group,
called a "bonus group", recorded.
• This operation can be carried out when
"BONUS" is lit in the display window on
the main unit.
While a disc is being played back
1 Set the remote control mode
selector to AUDIO.
2 Press repeatedly during
playback to select a bonus group.
• "KEY_ _ _ _" appears on the TV screen
and in the display window on the main
unit.
3 Press the number buttons to enter
the pin code (4 digits).
• The method of obtaining the pin code
differs depending on the disc.
4 Press .
• When a correct pin code is entered,
"BONUS" disappears and the playback
of the bonus group starts.
• If an incorrect pin code is entered, try
entering a correct pin code again.
Adjusting Playback Level
(DVD LEVEL)
: Sound level recorded in the
DVD.
: Enhances the sound level
(factory setting).
: Enhances the sound level to
the highest level.
Playing Back the Bonus
Group
Bonus indicator
UX-QD90[UNUS].book Page 31 Thursday, September 29, 2005 1:29 PM