Introduction
31
(Continued)
Convenient Functions of the DVD Player
The audio of a DVD VIDEO and DVD AUDIO may
be recorded at a lower level (volume) than for
other types of disc. You can adjust the DVD level.
■While a disc is being played back
Press .
• Each time you press , the display
changes as follows in the display win-
dow.
• Select the level while listening to the
sound played back.
NOTE
• DVD level is effective only for playback of a DVD.
• Even if the DVD level is changed, the output
level from the digital audio output terminal will not
be changed.
• This function does not affect the recording sound
being recorded.
Some DVD AUDIO discs have a special group,
called a "bonus group", recorded.
• This operation can be carried out when
"BONUS" is lit in the display window on
the main unit.
■While a disc is being played back
1 Set the remote control mode
selector to AUDIO.
2 Press repeatedly during
playback to select a bonus group.
• "KEY_ _ _ _" appears on the TV screen
and in the display window on the main
unit.
3 Press the number buttons to enter
the pin code (4 digits).
• The method of obtaining the pin code
differs depending on the disc.
4 Press .
• When a correct pin code is entered,
"BONUS" disappears and the playback
of the bonus group starts.
• If an incorrect pin code is entered, try
entering a correct pin code again.
Adjusting Playback Level
(DVD LEVEL)
: Sound level recorded in the
DVD.
: Enhances the sound level
(factory setting).
: Enhances the sound level to
the highest level.
Playing Back the Bonus
Group
Bonus indicator
UX-QD90[UG_UX].book Page 31 Tuesday, September 6, 2005 11:32 AM