Filter
Top Products
7
English
Playing Back a Disc
This manual mainly explains operations using the buttons and controls on the front panel. You can also use the buttons on the remote
control if they have the similar names (or marks) as those on the front panel.
If operations using the remote control are different from those using the front panel, they are then explained.
This unit has been designed to play back the following discs:
• Audio CD (CD)
• CD Recordable (CD-R) — both finalized and unfinalized discs
• CD Rewritable (CD-RW) — both finalized and unfinalized discs
1
Turn On the Power
Press POWER to set it to the _ ON position.
The display illuminates.
2
Load a Disc
1 Press 0 to open the disc tray.
2 Insert a disc — CD, CD-R or CD-RW.
• When using a CD single (8 cm), place it on the inner circle of
the tray.
Remote
NOT
If a disc is already loaded, the total track
number and the total playing time appear.
_
ON/
—
OFF
POWER
3
Start Playback
Press 3.
The disc tray automatically closes (“CLOSE” flashes on the
display), and the unit starts reading the disc information recorded on
the disc (“TOC READ” flashes), then starts playback — Normal
Play.
Notes:
• If you have loaded a CD-R, the CD-R indicator lights up. (If the disc
is finalized, the FINALIZE indicator also lights up.)
• If you have loaded a CD-RW, the CD-RW indicator lights up. (If the
disc is finalized, the FINALIZE indicator also lights up.)
To stop playing, press 7.
To eject the disc, press 0.
To turn off the unit, press POWER to set it in the — OFF position
so that the display goes off.
Disc tray
INCORRECT
CORRECT
When you have loaded a CD.
(See also notes below.)
DISPLAY
REPEAT
7
COMPACT DISC RECORDER
PROGRAM SET CLEAR
REPEAT
_
ON/
—
OFF
POWER
RANDOM
AUTO
TRACK
DISPLAY
REC
PAUSE
REC
REC LEVEL
MIN MAX
FINALIZE
ERASE
REC
SOURCE
DIGITAL
SYNCHRO
XL-R910
1
23
8
4 / 1
¢ / ¡
EN07-10.XL-R910[C]_f 01.3.13, 5:42 PM7