Filter
Top Products
14
English
Finalizing a Disc — CD-R/CD-RW
Finalization is the final process in recording on a CD-R or CD-RW.
“Finalizing a disc” means to finish writing the TOC (Table of
Contents) on the recorded disc. Only after this process is completed,
a recorded CD-R or CD-RW can be played back on a CD player
compatible with CD-R/CD-RW.
IMPORTANT
• Once a CD-R has been finalized, no more recording can be made
on the disc.
• If you unplug the power cord or if a power failure occurs during
finalization process, recorded data will be lost and the disc may not
be utilized any more.
1
Press FINALIZE while a disc you want to finalize
is placed on the disc tray.
“FINALIZE?” appears on the display.
• If you want to cancel finalization, press CLEAR.
2
Press SET to finalize the disc.
The FINALIZE indicator starts flashing on the
display.
The finalization process requires about a few
minutes to complete (when finalized, the
FINALIZE indicator stops flashing and remains
lit).
Unfinalizing a Disc — CD-RW
Once a CD-R has been finalized, no more recording will be made on
the disc. However, by erasing the TOC (Table of Contents), you can
record on a recorded CD-RW. This erasing process of the TOC is
called “Unfinalization.”
• Unfinalization is just to erase the TOC only, but not the recorded
music signals on the disc.
1
Press REC PAUSE while a disc you want to
unfinalize is placed on the disc tray.
“UN FINAL?” appears on the display.
• If you want to cancel unfinalization, press CLEAR.
2
Press SET to unfinalize the disc.
The FINALIZE indicator starts flashing on the
display.
The unfinalization process requires about a few
minutes to complete (when unfinalized, the
FINALIZE indicator goes off).
Erasing the Tracks on a CD-RW
You can erase a track or all the tracks on a CD-RW.
• One-track erasure: You can erase the last track.
• Disc erasure: You can erase all the tracks at once.
One-track Erasure
1
Load a disc — either a finalized or unfinalized
CD-RW.
• If the disc is already finalized, first unfinalize the disc. See
“Unfinalizing a Disc — CD-RW” on the left column.
2
Press ERASE repeatedly so that “TRACK ?”
appears on the display.
• Each time you press the button, the display alternately shows
“TRACK ?” and “DISC ?.”
To cancel the erasure, press 7.
3
Press SET.
The ERASE indicator starts flashing and the last
recorded track is erased.
4
Repeat steps 2 and 3 to erase the other tracks.
Disc Erasure
1
Load a disc — either a finalized or unfinalized
CD-RW.
• If the disc is already finalized, first unfinalize the disc. See
“Unfinalizing a Disc — CD-RW” on the left column.
2
Press ERASE repeatedly so that “DISC ?” appears
on the display.
• Each time you press the button, the display alternately shows
“TRACK ?” and “DISC ?.”
To cancel the erasure, press 7.
3
Press SET.
The ERASE indicator starts flashing and all the
tracks on the disc are erased.
FINALIZE
SET
Remote
NOT
Remote
NOT
ERASE
SET
ERASE
SET
REC
PAUSE
SET
Remote
NOT
EN11-14.XL-R910[C]_f 01.3.13, 5:41 PM14