Filter
Top Products
9
English
Selecting Playback Modes
To exit from program play mode, press 7 again or CLEAR before
or after play. The PROGRAM indicator goes off. The program you
have made is also erased.
• When you press 0, the program is also erased.
Note:
The display cannot show the hundred digit even if the total playing
time exceeds 100 minutes. (e.g. “105:00” will be shown as “05:00.”)
To confirm the program contents
Before playing, you can check the program contents by pressing
PROGRAM repeatedly.
The programed tracks will be shown on the display in the programed
order.
COMPACT DISC RECORDER
PROGRAM SET CLEAR
REPEAT
_
ON/
—
OFF
POWER
RANDOM
AUTO
TRACK
DISPLAY
REC
PAUSE
REC
REC LEVEL
MIN MAX
FINALIZE
ERASE
REC
SOURCE
DIGITAL
SYNCHRO
XL-R910
POWER = _ ON
_
ON/
—
OFF
POWER
PROGRAM
RANDOM CLEAR
73
Programming the Playing Order of the
Tracks — Program Play
You can arrange the order in which tracks play before you start
playing. You can program up to 30 tracks.
1
Load a disc.
2
Press PROGRAM so that the unit enters
program mode.
3
Press ¢ / ¡ (or 4 / 1) to select a track,
then press PROGRAM again.
4
Repeat the above step to program other tracks.
5
Press 3.
The tracks are played in the order
you have programed.
To stop playing, press 7.
Track number
Step number in the program
(“C” stands for “Confirm.”)
Ex.: Track 3 is stored into program step 1.
PROGRAM
PROGRAM
0
4 / 1
¢ / ¡
EN07-10.XL-R910[C]_f 01.3.13, 5:42 PM9