Filter
Top Products
48
At the margins of the footprints of a satellite (e.g. after a slight change of position), it may be necessary for
you to manually correct the setting (not normally required). It is also possible to manually correct the fi ne
tuning.
Press the
button to return to the main menu. By using the
buttons and the
button you can call
up sub-menus (“Settings”, “Antenna Confi guration”).
MANUAL CORRECTION
You can correct the inclination and horizontal angle of the antenna using the “Elevation” and “Azimuth
direction” settings. To do this press the
buttons or enter a numeric value using the numeric keys
and confi rm with
button. Check your settings by referring to the “Signal-Strength” and “Signal-Quality”
bars on the right-hand side. The higher the bar, the stronger and better quality the signal received.
The new co-ordinates are not assigned
to the satellite until you have saved
the satellite position when exiting the
“Antenna Confi guration” menu!
When you have performed the correction, press the
button to exit the menu. You will be asked whether
you wish to save the changes.
Press one of the
buttons (“Yes, save the changes” or “No, don’t save changes”) and confi rm by
pressing the
button.
ALIGNMENT (SATELLITE SEARCH)