Filter
Top Products
Starting up
16
Setup menu
The default setting (status of the MSK 24 when it is switched on) can be
set in the setup menu.
Factory settings
Parameter Setting
POWER ON TV
LNB DC OFF
LEVEL dBìV
Low Level Mute ON
Settings in the setup menu
Calling up the setup menu
Press the [2ndF] and [SETUP] buttons.
Press button [1], [2] or [3] to select the appropriate TV, SAT or FM mode.
Press [ENTER] to retain the current setting.
1. Setup menu
The following request appears:
Press button [1] or [2] to switch the LNB voltage supply on or off. Press
[ENTER] to retain the current setting.
2. Setup menu
In the next menu press button [1] or [2] to set the measuring unit in which
the level should be displayed. Press [ENTER] to retain the current
setting.
3. Setup menu
In the next menu you are requested to set the mute function by pressing
button [1] or [2]. Select "ON" to mute the MSK 24 as long as the input
signal on the RF input is below 30 dBìV.
4. Setup menu
Press [ENTER] to retain the current setting.
If you have not altered the factory default setting, the information shown
on the left is displayed.
Default setting
As soon as you have set the low level mute, setup menu 4 is exited
automatically and the default setting displayed.
POWER ON
TV=1 SAT=2 FM=3
LNB DC
OFF=1 ON=2
LOW LEVEL MUTE
OFF=1 ON=2
CH: .07. TV
LEV:____.__dBµV
Level
dBµV=1 dBmV=2