Filter
Top Products
General Notes
6
General Notes
This manual has been written for persons with a basic knowledge of
electrical engineering. At every step users who have already worked with
measuring instruments can find the necessary commands in an overview.
In addition, the following examples help to explain the operating steps.
Explanation of symbols
Instructions shown with the warning symbol must be observed as
otherwise the MSK 24 may be damaged or destroyed.
This symbol provides information on measuring functions and refers you
to chapters containing further information on a subject.
This symbol is followed by an example of the measuring function just
explained.
Here you will find an overview of the commands for the button
combinations for the relevant measuring function.
The button to be pressed on the receiver.
Safety instructions
Always observe VDE safety regulations!
Use only fuses that have the same cutout characteristics.
Observe the following upper limits when supplying signals:
• HF input: max. 120 dBìV (60dBmV)
• Do not apply a DC voltage >22 V to the HF socket
• Do not apply a low-frequency AC voltage to the HF socket
The receiver is also live when disconnected.
Use only the power supply unit supplied to power the MSK 24.
A voltage of between 10 V and 20 V is available at the RF input socket
depending on the programming. The source can supply up to 500 mA.
Parts supplied
1 plug-in power supply unit
1 BNC measuring cable
1 adapter for BNC socket to F socket
1 adapter for BNC socket to F plug
1 adapter for BNC socket to IEC socket
1 adapter for BNC socket to IEC plug
+
0
ë
[Button]