Filter
Top Products
SAT measurement
21
Bearing for Individual Reception Frequencies
The „LEVEL ♫“ function allows the antenna alignment to maximum
received signal via bearing. The level tendency can be bargraph-
displayed.The measurement range can be adjusted to three different
sensitivity levels.
The level can be monitored with an acoustic signal, the pitch of which is
proportional to the received-signal level. The volume of the directional
radio audio signal can be adjusted with the volume regulator.
Bearing Menu
[2ndF] [LEVEL ♫] Changing over to bearing mode:
[-] [+] Change-over of the measurement range of the bar graph. The
measurement range is automatically preselected.
Level range 1: high input levels
Level range 2: medium input levels
Level range 3: low input levels
[2ndF] [2ndF] Exit
LC display:
• Level range 2: medium input level
• Mode: SAT
• Bargraph display
Example
Calling up „LEVEL ♫“ mode
Press [2ndF] [LEVEL♫].
Move the antenna until the maximum amplitude of the bargraph display is
reached.
If necessary, diminish or elevate the sensitivity by pressing either [-] or
[+] .
Repeat this procedure until the maximum level is reached.
Exit:
Press [2ndF] twice.
LEV-Range:2 SAT
> ■■■■
À
✐