Filter
Top Products
TV measurement
34
Channel display and channel entry
You first have to set the required channel to be able to measure the level
of a TV reception signal. The following channels may be set:
• Band /III CH 01 to CH 12 in 7 MHz raster
• Band IV/V CH 21 to CH 70 in 8 MHz raster
• Special channel S 02 to S 03 in 8 MHz raster
• Special channel S 04 to S 20 in 7 MHz raster
• Special channel S 21 to S 41 in 8-MHz raster
This information applies only for the factory-set B/G standard. Please find
more information on further standards in the technical appendix.
TV Channel Setting Menu
[SAT/TV] Changing over to TV reception
[0] bis [9] Setting channel
[./S] Changing over to special channel
[+] und [-] Varying channels stepwise
Example
Setting channel S11:
Press [./S] [1] [1].
LC display:
• Special channel: S 11
• Level: 62,5 dBµV
• Mode: TV analog
Note
Make sure that the correct standard has been set. B/G standard is
factory-set.
CH:S.11. TV
LEV: 62,5dBuV A
✐
À
☞