Filter
Top Products
Programme selection
Reception status analogue
When you receive an analogue programme, you can also call up other
programmes with the
ou buttons. Analogue programmes appeare for a
short time recognisable on the white display, e.g.:
TV 59 DER KINDERKA STEREO
By pressing the O button the selected
programme is shown in the same form.
With the i button the programme list
appears again as a white display . The
displays shows the memory, programme
name, and type of reception, "A" or "D"
(analogue or digital). With the
ou- and -+ buttons, jump to the
neighbouring page, the same as for
digital programmes.
With the O button select the desired programme, with the L button exit the
programme list and remain in the already set programme.
If you have now called up a digital programme, the coloured display for this broad-
casting type will appear as a confirmation.
TV programme selection by number entry
You can select another TV programme during a current programme by entering the
programme location number.
Use the number buttons 1 to 0 for the purpose of entering the programme
locations.
Example You wish to select the TV programme "DSF". This programme is stored under the
programme location number 015. (The order of TV programmes is defined in the
programme memory and therefore only serves as an example here.)
To select this programme, press the numbers
1 and 5 one after the other.
The receiver waits for about 3 seconds for entry of the next number.
Follow the same procedure for all other programmes – i.e. also programmes with
three-digit programme location numbers. You do not have to enter leading zeros.
Switching over to radio programme
You can switch over from a TV programme to a radio programme.
Press the
Rbutton on the remote control for this purpose.
The receiver switches over to the programme location of the radio programmes last
set. You can return to the TV programme by pressing the same button or T. The
corresponding display relating to the received programme, i.e. as when selecting
the TV programmes, appears on the screen. The LCD display shows a small "r"
together with the programme location number.
The screen will be blanked out after several seconds.
20