Filter
Top Products
Programme list - TV/radio
Only alphanumerical and decimal entries are accepted at the positions
name, ·
·
·
·
·
video PID (programme identification),
audio PID,
PCR PID (PCR = Programme Clock Reference) and
audio PID dig.
Incorrect PID entries are rejected with the displayed message.
Incorrect parameter
Press the
L button 3 times to return to the TV screen. Confirmation is given that
your changes have been saved and the information display of the programme cur-
rently received appears for several seconds on the screen. The new programme is
added to the end of the existing programme list.
You can obtain the necessary PIDs from relevant TV and satellite magazines, the
internet as well as from SAT 1 teletext. Refer to section "Operating instructions" for
information on how to make alphanumeric entries.
Never change the PIDs without good reason as they affect the identification of the
reception signal.
To add analogue programmes
Analogue television programmes always occupy one transponder. Therefore, pro-
ceed like newly setting an analogue transponder (see section "Analogue-
transponder").
Analogue programme list
With the reception of analogue stations,
the programme list is requested with
i
and is displayed in white. To indicate the
desired programme, use the
-+ and
ou buttons to move the arrow on
the left side of the list either page-by-page
or line-by-line.
Press
O to switch to the indicated
programme and the info bar is displayed white for a short time.
27