Filter
Top Products
Analogue setting
Frequency left/right
Here, you can select one of two sound carriers. For example, in the case of com-
mentary channels or film broadcasts in different languages. The setting is made
with the - or + buttons and the numerical buttons.
The initial setting is “7.02 MHz“ and “7.20 MHz“.
Bandwidth
Here, you can select the input bandwidth of the analogue audio receiver, since dif-
ferent transponders also have different transmission bandwidths, to which the re-
ceiver needs to be tuned.
The following settings are possible:
·
·
·
·
·
:
·
·
·
·
130 kHz,
180 kHz,
280 kHz,
300 kHz and
400 kHz.
The initial setting is “130 kHz“.
DNR
The DNR setting here stands for Dynamic Noise Reduction applied to the audio
signal. The effect is similar to that of the Dolby system on cassette recorders. You
can select either "ACTIVE" or “INACTIVE”.
The initial setting is “ACTIVE“.
De-emphasis
The de-emphasis compensates for the pre-emphasis on the transmission. The
resultant effect is a type of noise suppression. The setting options are possible
50 µs,
75 µs,
J17 and
NO DEEMP.
The initial setting “75 µs“.
46