Filter
Top Products
TVTV EPG and Timer
35
You can use the
buttons to switch to the details on the next
programme in the selected view. Press
to return to the previous
display, such as the programme list.
Programming a Recording
You can programme a recording from the various views of the
EPG (“Current”, “Program list”, “Highlights” and “Det.information”
[Details]) and from within their various submenus.
Programming is pre-configured for two SAT IF input signals. If you are
operating the receiver in Loop mode (“LNB 1 Loop out” output on
“LNB 2 in” input), this may cause problems when two programmes are
recorded at once (if both programmes are not transmitted on the same
transponder).
Use the arrow buttons (
) to select the programme you
want and press the red
button. The following display appears
(example):
If no EPG data is available fo
r
the channel you selected:
In the “Current” view select the
channel for which you want to
programme a recording and
press the red
button.
A
s
there is no EPG data, you mus
t
enter the data (date, start, end)
manually. Use the arrow buttons
(
) and numbe
r
buttons to make your input.
Press
to save your settings.