Filter
Top Products
60
TVTV EPG and Timer
You can use the
buttons to switch to the details on the next
programme in the selected view. Press
to return to the previous
display, such as the programme list.
Programming a Recording
You can programme a recording from the various views of the
EPG (“Current”, “Programme list”, “Highlights” and “Det.inform.”
[Details]) and from within their various sub-menus. When programming
recordings, the EPG automatically adapts to the actual SAT
IF input signal mode (Single/Loop Through/Double Tuner). Example:
If you are operating the UFS 821 in loop-through mode, you cannot
simultaneously record one programme on the ARD channel and one on
the ProSieben channel, because the two channels are not transmitted
on the same transponder.
Use the arrow buttons (
) to select the programme you want
and press the red
button. The following display appears (example):
If there are no EPG data available
for the channel you selected:
Select the channel for which you
want to programme a recording
in the “Current” view and press
the red
button. As there is no
EPG data, you must enter the
data (date, start, end) manually.
Enter the data using the cursor
(
) and number pad.
Press
to save your settings.
A time window of two minutes at the
beginning and five minutes at the
end is automatically set.