Filter
Top Products
98
Connecting up the Video/PVR
For details of how to connect your external recorder to the receiver refer
to the connection diagram provided at the end of this manual and the
instructions for the external recorder.
Recording
In order to make a VCR recording (Record), the satellite receiver must
be switched on or the timers must be pre-programmed (see “Timer
Settings” section).
Playback
For VCR/PVR playback (Play), the UFS 821 must be set to “Standby”,
so that the signal path is switched through from the VCR or PVR/AUX
Scart socket to the TV Scart socket.
You must first set the Scart socket of the UFS 821 to “AUX” with
the
button while the receiver is in operation in order for your TV set
to automatically play back the picture from the external recorder.
In this setting, the picture from the external recorder is switched through
to the TV set during playback. Pressing
again restores priority to the
signal from the UFS 821.
For system reasons the TV and VCR Scart sockets carry the same
signal!
Note: