Filter
Top Products
95
Installation Menu
Use the
buttons to select the tuner for which you want to make
the settings and confirm your menu selection by pressing the
button.
The settings for both tuners are made in the same way.
Tuner Settings
Select Satellite:
Use the
buttons to select the satellite here.
Select Transponder:
Use the
buttons to select the transponder here.
Motorised Antenna Setup:
Use the
buttons to select the control signal you want to use for
the motorised antenna here (DiSEqC™1.2, DiSEqC™1.3 (USALS) or
OFF for none).
Motor Control:
Use the
buttons to select the command for the motorised antenna
here. You can choose between:
- Stop
- Save
- Set East Limit (Start rotation eastwards with
button/step-by-step
eastwards with
)
- Set West Limit (Start rotation westwards with
button/step-by-step
westwards with
)
- Limits Off
- Reset
Action:
Press
or choose “OK” to activate the “Stop”, “Save”, “Limits Off”
and “Reset” actions. You can also press the
/
button here to stop
ongoing rotations and save the current position.
The optimum setup is shown by
the signal strength and quality
bar charts at the bottom.
With the East/West limit you
can set the extreme stop points
(limited by a wall or other
obstacles) in the westward and
eastward directions.
Always read the operating
manual supplied by the
rotor/antenna manufacturer
thoroughly (particularly with
regard to settings different to
those described here).