Filter
Top Products
117
INSTALLATION MENU
DiSEqC™1.0:
Press the
buttons to make your selection.
- 1 of 4: for the fi rst satellite of the tuner
- 2 of 4: for the second satellite of the tuner
- 3 of 4: for the third satellite of the tuner
- 4 of 4: for the fourth satellite of the tuner
- Mini A: Tone-burst control signal 1 for the fi rst satellite of the tuner (if reception system not DiSEqC™
compatible)
- Mini B: Tone-burst control signal 2 for the second satellite of the tuner (if reception system not DiSEqC™
compatible)
- Disable: If your reception system is not DiSEqC™ compatible and only one satellite per tuner is
selected
Single-cable frequency:
If you have selected “Single-cable system”, you can here manually select the single-cable frequency for
tuner 1 and tuner 2 (see “First installation”).
Save:
Once you have made all the settings, use the
buttons to select “Save” and press the
button to
save the data.
Use the
buttons to select whether you want the search to cover all satellites or only one specifi c
one. If you select “All Satellites” only “Automatic Search” mode is possible. If you choose one specifi c
satellite, your options are:
- Automatic Search: Unrestricted search across all transponders on all satellites (network search
possible, selection of FTA and encoded channels possible)
- Manual Search (transponder selection possible, FTA and encoded channels possible, network search
possible)
- Advanced Search: Search for a specifi c channel possible, based on transponder data and PIDs
CHANNEL SEARCH