Filter
Top Products
124
Satellite Name:
Press the
button to access a list of all stored satellites. Use the
buttons to select
the satellite you want.
Transponder Frequency:
Use the
buttons to select the transponder frequency.
Edit Satellite Longitude:
Use the numeric pad to key in the new longitude. Use the
buttons to choose between E (East)
and W (West).
New Satellite:
Press the
button to enter the name of a new satellite using the alphanumeric keypad (see
“Alphanumeric Inputs”).
You can now edit the “Satellite Longitude” setting for this satellite.
Delete Satellite:
Press the
button to delete the currently selected satellite. Use the
buttons to select “OK” on
the on-screen prompt and press the
button to confi rm deletion of the satellite with all its transponders
and channels.
INSTALLATION MENU
EDIT TRANSPONDERS
Only make changes to this menu when settings or circumstances relating to the
transponders have changed. The settings should be made by a specialist engineer.
Deleted satellites must be re-entered manually. If the satellite was factory pre-
programmed, it can also be restored by a factory reset. In the process however all
your personalised settings (such as Favorites lists) will be lost.