Kenwood DM-9090 DVD Recorder User Manual


 
DM-9090 (En)
48
1
Transmit the CD text into the MD recorder.
3
Each press switches the mode.
1 TITLE not lit : TITLE INPUT mode is off
2 TITLE blinking : TITLE INPUT mode is on
2
Record tracks while copying the CD text.
Eject the Mini Disc.
While “WRITING” is displayed, do not apply shock
or vibration to the unit because information is
being written on the Mini Disc.
Preparation
Display after execution
“COMPLETE!” : Copy is completed.
“CAN’T LOAD” : Copy is incomplete.
“CAN’T ACCESS” : A CD text-compatible CD player is not connected
to this unit.
÷When the text copy function has been set, the text (track titles) is
transmitted from the CD to the MD.
÷To abort the CD text copy in the middle, eject the copy source CD.
÷To abort recording in the middle, press the 7 key of the CD player.
Information is
being written.
Mini Disc has been ejected.
1 Set the amplifier’s input selector to CD.
2 Switch off the program mode of the CD player.
3 Put the CD player and MD recorder to stop mode.
4 Set the MD recorder to the DIGITAL mode for accepting the input signal from the CD player.
By connecting this unit with a KENWOOD CD Text-compatible CD player (which carries “CD TEXT” marking on the rear panel)
through a synchro cord and a digital cord or optical fiber cable, the text (track titles) and music of CD tracks can be copied onto
a MD disc. It is not possible to copy the text alone. However, note that the copying of CD text may not be possible with certain
discs.
Copying the CD text
1 Switch the TITLE INPUT mode on.
2 Select “CDtext LOAD”.
3 Set the selection (by pressing the JOG
DIAL).
The modes are switched by rotating the JOG DIAL.
1 DISC : Disc title
2 001 : Track title
3 PRE 1-PRE 9 : Preset title
4 ALL ERASE? : Erasing both disc and track titles
5 CDtext LOAD?: Preparing for CD text copy
Display after execution
“CAN’T COPY” : Copy failed.
CD text editing
To delete the CD text data copied on MD:
While “COPY” is lit, press the REC INPUT key to switch the
mode.
÷The copied CD text data is deleted automatically.
L?t
x
OAD
OVER (
dB)
R
L
SINGLE
TITLE
tCD
15
912 7
5
1
3
40 30
21
18
0
SEARCHPGM
MONITOR
ANALOG
32kHz
213
48kHz
44.1kHz
DIGITAL
e
N
ODI
S
C
WRITING EJECT
Note
Note
INPUT SEARCH
TITLE
U PDOWN
PUSH SET
JOG DIAL
U PDOWN
PUSH SET
JOG DIAL
0
“COPY” blinks “COPY” lights up
1 Put the CD player in pause mode.
2 Select the CD track to be recorded using the 4 or ¢ key.
3 Put the MD recorder in record-pause mode.
4 Start playback of the CD player.
!
ETM
L
OVER (
dB)
R
L
SINGLECOPY
TITLE
ECO
15
912 7
5
1
3
40 30
21
18
0
SEARCHPGM
MONITOR
ANALOG
32kHz
213
48kHz
44.1kHz
DIGITAL
P
00
:01
OVER (
dB)
R
L
SINGLECOPY
TITLE
00
15
912 7
5
1
3
40 30
21
18
0
SEARCHPGM
MONITOR
ANALOG
32kHz
213
48kHz
44.1kHz
DIGITAL