Filter
Top Products
This function permits the text to be scrolled and the entire text
to be displayed. The scrolling method differs depending on the
setting of scrolling in the menu.
To scroll automatically:
Press the DISP button to display the disc title or the track title.
The display of the text will be scrolled repeatedly.
To scroll manually:
Press the DISP button to display the disc title or the track title.
Press the SCRL button.
The display of the text will be scrolled once.
Please see the function settings (page 25) about switching
between manual scrolling and automatic scrolling.
NOTE
2
1
Text / Title Scroll (Function of MD/disc changers)
CD/MD/External disc control features
— 18 —
English
Play the tracks on all the discs in the disc changer in random
order.
Press the M.RDM button to switch magazine random play on
and off.
The M.RDM indicator lights up when magazine random play is
turned on.
The disc and track numbers will change over and over in the
display as the next track is being selected.
When the disc/track has been selected, play will begin.
This function is not available with the following models:
KDC-C200/C300/C400/C301/C401
To change the track being heard, press the ¢ button.
Another disc/track will be selected and played.
• Magazine random play is canceled when you eject the disc.
• The time needed for random selection depends on the number
of discs loaded in the disc magazine.
NOTE
2
NOTE
1
Magazine Random Play (Function of disc changers)
Store the names of CDs to be displayed when played.
Play the disc whose name you want to preset.
• This function is not available for disc changers that do not
feature the Disc Name Preset function.
• This procedure is not to be used to store the disc and track
titles for MDs that you record.
• This function cannot be available during the clock display and
while using disc scan or magazine random play.
Press the NAME.S button for at least two seconds.
"Name Set" is displayed and the disc name preset mode is
entered.
The cursor blinks in the position where character input can be
made.
Press either the 4 or ¢ button to move the cursor to the
desired position.
The 4 button moves the cursor to the left, and the ¢
button to the right.
Each time the COL button is pressed, the characters to be
entered change as listed below.
Press the DISC
+ or DISC– button to display the desired
character.
Characters that can be displayed are as follows.
The operation and characters that can be entered may change
as listed below, depending on the unit that is connected.
NOTE
Alphabet (upper case):
A ~ Z
Alphabet (lower case):
a ~ z
Numerals/Symbols:
0~9 / + – * & " ° ' = < > [ ]
4
3
2
NOTE
1
Presetting Disc Names (DNPS)