Filter
Top Products
— 23 —
This function produces a beep sound that accompanies button
operation. It can be switched on or off.
Display and setting:
"BEEP ON"
"BEEP OFF"
The beep sound is not output from the preout jacks.
NOTE
Touch Sensor Tone
Function items in Standby mode:
This adjustment permits easy viewing of the display.
Display and setting:
"Contrast 1" – "Contrast 11"
The initial setting value is "6" .
NOTE
Contrast Adjustment
Switch the preout between the rear and non-fading. When you
switch to non-fading, you can adjust the volume separately.
The factory default is rear preout.
Display and setting:
"Preout REAR" : Rear preout
"Preout N-F" : Non-fading preout
Switching Preout
If this function is set to on, the opening display appears when
the power is turned on.
Display and setting:
”Opening ON“ : Opening display function is on.
”Opening OFF“ : Opening display function is off.
Opening Display
If you set this function to "V-Color Sync", you can change the
display illumination color using the Volume button, and whilst
the attenuator is ON, the Red and Blue illumination colors will
change places.
Display and setting:
”V-Color Sync“
”V-Color Fix“
Variable Illumination Color