Filter
Top Products
— 19 —
Operations can be followed again from Step 2 at a time such
as this, and the characters to be input are selected using the
procedure described below.
Press the DISC+ or DISC– button to display the desired
character. Besides the alphabet (capital letters only) and
numbers, you can choose the following characters: /, +, –, ∗,
=, <, >, [ and ].
Continue steps 3 and 4 until all the characters are chosen for
the name.
You can enter up to 8 characters for each name.
Press the NAME.S button.
The disc name is stored and the disc name preset mode is
canceled.
If you make no entry in a 10-second period, the name will be
stored with the characters input so far.
• The number of discs whose names can be stored will differ
depending on the disc changer that is connected. Please see
your disc changer manual for details.
Up to 10 CDs can be registered with this unit.
• Discs are identified by their total length and number of tracks. If
another disc happens to have the same specifications as one
that you have already stored a name for, the name will be
displayed for it, too.
• If you want to change the name of a disc, repeat steps 1 and 2
to display the name, and then repeat steps 3 and 4 to input the
changes.
• Pressing the reset button erases the disc names stored in this
unit, but does not erase names stored in a disc changer.
• Each source (CD,CD-CH1,CD-CH2/DISC-CH1/DISC-CH2) has its
own memory in which to store the disc names.
Discs that have been disc name preset with the CD player will
not have their disc name displayed when played on a CD
changer.
NOTE
6
NOTE
5
OPEN
7 BAND EQUALIZER
OFF
PWR
CRSC
AUD
NAME.S
DISP
USER
FNC
DISC
MD CD RECEIVER
DSP EQ
DSP indicator
EQ indicator
Sound field control name/ KBS name
/ Equalizer frequency and level display
#1~3
EQ
FM/AM
4/¢
DSP/Graphic Equalizer features