Kenwood DV-4070 DVD Player User Manual


 
13
Connections
Chapter 1: Connection of Equipment
Connection with an AV Amplifier
Do not insert the power cord plugs of the player and
the connected components until all of the components
have been connected.
For details on the connection terminals and functions
of the AV amplifier, refer to its instruction manual.
The video output from the player should be connected
directly to the AV amplifier. If the video output is
connected through a VCR, the picture displayed on
the TV may be disturbed due to the copy protect
Setup for digital audio connection: If the connected
AV amplifier does not contain any of Dolby Digi-
tal, DTS and MPEG decoder, be sure to set the
"Digital Audio" settings after connecting the player
to it.
For the nonexistent decoders, set the "Digital Audio"
setting to "PCM". If the player is played without
changing the initial "Bitstream" setting, extremely
loud noise will be produced and may damage the
speakers.
"Digital Audio PCM Down Conversion" Setting
§
"Digital Audio Dolby Digital" Setting §
"Digital Audio DTS" Setting
"Digital Audio MPEG" Setting
Setup for 6-channel audio connection: When the
audio is connected using the 6CH. OUTPUT jacks
of the player, set the player as follows.
"Speaker Setting"
Audio output from DVD AUDIO
When the "D.MIX" (down-mix) indicator is not lit,
the MIX LINE OUTPUT, DIGITAL OUTPUT and
PHONES output jacks output the front (L/R) channel
signals instead of the down-mixed 2-channel signals.
The 6CH. OUTPUT jacks output the same number of
channels as the original number of channels recorded
in the DVD AUDIO disc, regardless of the speaker
setting. When the "P.PCM" indicator is lit, the 6CH.
OUTPUT jacks output the same number of channels
as the original number of channels regardless of
whether the "D.MIX" indicator is lit or not.
function.
To Connect an AV amplifier
6-Channel audio connection: When the connected
AV amplifier has 6-channel audio input jacks, con-
nect the 6CH. OUTPUT jacks of the player to them.
When an amplifier which is not compatible with
6-channel inputs is connected, use the signals
from the MIX LINE OUTPUT jacks of the player.
The multi-channel surround audio will be down-
mixed and output. e
Audio connection: Connect the MIX LINE OUTPUT
jacks of the player to the audio input jacks of the
AV amplifier using the provided audio cables.
Digital audio connection: Connect the OPTICAL
DIGITAL OUTPUT connector of the player to the
digital audio input connector of the AV amplifier.
Do not bend or bundle the optical fiber cable.
Be sure to attach the protection caps on the
optical connectors when they are not used.
It is also possible to perform digital connection
using a commercially available coaxial cable and
the COAXIAL DIGITAL OUTPUT jack. In the
coaxial digital connection, be sure to use a digital
audio cable, not an ordinary audio cable.
Video connection: Connect the VIDEO OUTPUT jack
of the player to the video input jack of the AV am-
plifier using the provided video cable.
S Video connection: When the connected TV has an
S Video connector, connect the S VIDEO OUTPUT
connector of the player to it using the provided
S Video cable.
As S Video separates video signal into the
luminance signal (Y) and color signal (C), it can
provide sharper pictures than ordinary video
connection.
To Set Up of the Player
Setup of Menu screen: The language to be used in
the menus of the player can be selected.
"Player Menu Language" Setting
Setups Related to TV: The following setups can be
made according to the TV connected to the player.
"TV Aspect" Setting )
"TV Mode" Setting )
"TV Monitor Type" Setting ¡