Kenwood DV-4070 DVD Player User Manual


 
Settings
23
Chapter 2: Various Setups
"On Screen Message" Setting
This setting makes it possible to enable or display of
on-screen messages which notifies the user of various
information.
At the factory, the player has been set to "On" for
displaying on-screen messages.
Setting items
" " : Select to return to the previous screen.
"On" : Select to display on-screen messages.
"Off" : Select to not to display on-screen messages.
Operation procedure
1.
Set the mode switch of the joystick remote to the
Purple position.
2. While the player is in stop mode, press
SET UP
1
to
display the "MAIN" menu of "SET UP MENU".
3. Press
ENTER
to open the setup screen.
4. In the setup menu, select "OSD Position" by tilting
the joystick up or down and press
ENTER
.
7
7
Normal
7
Cinema
7
OSD Position
On Screen Message
IPB Display
TV Aspect
TV Mode
TV Monitor Type
DVD VIDEO Mode
Rating
5. Select the OSD position by tilting the joystick up
or down, then press
ENTER
to enter the selection in
memory.
Operation procedure
1.
Set the mode switch of the joystick remote to the
Purple position.
2. While the player is in stop mode, press
SET UP
1
to
display the "MAIN" menu of "SET UP MENU".
3. Press
ENTER
to open the setup screen.
4. In the setup menu, select "On Screen Message"
by tilting the joystick up or down and press
ENTER
.
7
7
On
7
Off
7
OSD Position
On Screen Message
IPB Display
TV Aspect
TV Mode
TV Monitor Type
DVD VIDEO Mode
Rating
5. Select "On" or "Off" by tilting the joystick up or
down, then press
ENTER
to enter the selection in
memory.