Filter
Top Products
35
DVR-605/DVR-6100/DVR-6100K (EN)
Operations
DVD
CD
VCD
Program play
Program Edit
1During stop mode, press the PGM key
on the remote.
2Select a specific title/chapter or
track by pressing Cursor up/
down (5/∞) keys or numeric
keys (0-9).
3Press the ENTER key.
Program edit display appears.
(An example of DVD program edit menu)
4Select Add icon on the screen to
register selected value onto
Playlist, then press the ENTER key.
You can listen to the desired tracks or chapters of the current disc in any desired order.
5You can select maximum 32 val-
ues by repeating step 2
-
4.
6Press the PLAY key to start play-
back.
2
: Selected icon
: An icon which can be selected
: An icon which presently can not be selected
÷ When you don’t add values onto “Playlist” and
return to play mode, select Done icon and press
ENTER key on the remote.
÷ While a disc is playing, press PGM key on the remote
to start Program play
÷ To return to standard play, press the PGM key again.
÷ MP3 discs can not be programmed with this pro-
gram mode. (MP3 program play t)
Add / Insert icon --- Add / Insert value to “Playlist”
Delete icon --- Delete value from “Playlist”
Play icon --- Play program play
Done icon --- Return to stop or resume mode
Registering and playing the program
Insert the disc to be used in programming in the tray, close it and press the PLAY key so that the player reads the
disc information by playing disc until display “READING” disappears. (If the tray is opened after this, the above
procedure should be repeated so that the player reads disc information again.)
PROGRAM EDIT
2
All
Add
Delete
CT
Play
Done
Title
(12) (2)
Chapter
Playlist
PROGRAM EDIT
2
All
Add
Delete
CT
Play
Done
Title
(12) (2)
Chapter
Playlist
2All
NoteNote
Note
+100
PGM
ENTER
ENTER
ENTER
ENTER