Filter
Top Products
56
DVR-605/DVR-6100/DVR-6100K (EN)
Operations
1Play a disc marked “Dolby Digital”.
3
2Select the speaker.
REAR
CENTER
FRONT
SW
3Press the TRIM (5/∞) key to setting
the speaker level.
5
∞
TRIM
1Select the SAT, CABLE or FRONT key.
SAT
or
FRONT
AUX
2Press the INPUT MODE key.
INPUT MODE
RANDOM
Level setting using a music source
A music source can be used for speaker level setting and subwoofer level setting.
Speaker level adjustment can be performed by
pressing the keys FRONT, CENTER, REAR, and SW.
F: Front speakers
Switching is done as follows each time the switch
is pressed.
1 L ch : Left speaker
2 R ch : Right speaker
C: Center speaker
R: Rear (Surround) speakers
Switching is done as follows each time the switch
is pressed.
1 LS ch : Left surround speaker
2 RS ch : Right surround speaker
SW: Subwoofer
The speaker level can be changed in the range from -10
dB to +10 dB.
Changing the INPUT MODE
The input mode can be switched with SAT/CABLE and FRONT. For better sound quality, connect the digital output of
your component with a coaxial or optical cable and change the input mode as follows.
Each press switches the mode.
SAT/CABLE input
1 AUTO
2 COAXIAL
3 ANALOG
FRONT input
1 AUTO
2 OPTICAL
3 ANALOG
Note
Note
When the video is displayed, but no sound is put
out, the source may not contain digital audio. In such
a case, please switch to ANALOG.
Changing the INPUT MODE
Speaker setting
CABLE
or
÷ AUTO input mode only checks the input signal when the
INPUT is changed. The input does not automatically switch
from digital (optical/coaxial) to ANALOG when the digital
signal from the source component stops. In this case, use
the remote to select ANALOG input mode.