Filter
Top Products
13
Selecting the Point Marker Type
Each time you touch [ Marker ], the mode
switches as follows:
" Type 1 "
" Type 2 "
" OFF "
No display the pointer marker.
Adjusting the Navigation Sound Level
If the guide etc., sound from the navigation
system interrupts, the sound level can be
adjust.
Touch [ 3 ] to increase the level.
Touch [ 2 ] to decrease the level.
This function available when the KENWOOD
navigation unit is connected.
Setting the On Screen Display Function
Each time you touch [ On Screen ], the mode
switches as follows:
" Auto "
When a button on the main unit or remote control
unit is pressed, or the disc track is changed, the
information is temporarily superimposed on the
picture.
" Manual "
When the lower centre of the screen is touched
whilst a TV/video picture is displayed, the
information is temporarily superimposed on the
picture.
Setting the Information on the Graphic
Screen
You can set whether or not to display the
information on the graphic screen.
Each time you touch [ Drive Info ], the mode
switches as follows:
" ON "
Information function is on
" OFF "
Information function is off
Demonstration Function
Each time you touch [ DEMO ], the mode
switches as follows:
" ON "
The graphic screen’s background mode switches
repeatedly.
" OFF "
the demonstration function is off.
NOTE
J
K
I
M
J
K
M
L
System Setup Screen-3
L