Filter
Top Products
31
function during tuner reception. The volume is
only set when it is louder than the listening
volume of the tuner.
•You can arrange only to listen to traffic
information or news bulletins with at preset
volume with the volume set at minimum.
Traffic Information Function
You can listen to traffic information. If you are
listening to discs, they will continue playing
until a traffic bulletin is broadcast.
Turning TI function On/Off
Press the [ TI ] button to turn the function on and off.
When the function is on, the TI indicator is
displayed.
If you are listening to a disc when a traffic bulletin
begins, playback will be interrupted. When the
bulletin ends or poor reception causes signal
losses , the disc will continue to play again.
Seeking to a Different Traffic
Information Station
Use the [ 4 ] / [ ¢ ] button to make an auto
seek of the TI stations in a certain band.
•When you are listening to a disc, you cannot
change to another TI station.
•When the auto TP seek function is turned on and
reception starts to weaken, the tuner
automatically seeks stations with better
reception.
•If you are tuned to a station that is not a traffic
information station itself but which provides
<Enhanced Other Network> services, you can
still have traffic information received.
Presetting the Volume for Traffic
Information/News
Preset the volume level to be used for traffic
information and news broadcasts.
Tune into the station for which you want to
set the volume.
Adjust the volume to the desired level.
Hold down the [ TI ] button for two seconds
or more.
The volume level that has now been stored.
Future traffic information/news broadcasts are
heard at the preset level.
•The volume cannot be lowered by this
NOTE
3
2
1
NOTE
R
Q
ATT TI
SOURCE
EJECT
V
O
L
V
O
L
DISC/BAND
SCREENV.SEL
P
R
Q
P
Q