Filter
Top Products
77
15 OPERATOR CONVENIENCES
• Directly select a Menu No. without pressing
[MENU] and turning the MULTI/ CH control.
• Activate the same function as one of the front
panel keys.
One of the following functions can be assigned to
each PF key. Selecting OFF assigns no function to
the PF key.
.N.A2/1TNAB=AB/A.C.BLLAC1HC
2HC3HCRLCLRTCENUTWCINOMPSD
ENIFNI.M)OMEMKCIUQ(NI.M)OMEMKCIUQ(RM
Ms OFVrebmuNUNEMBN.R.NFFOzHM1
INOMXRNACSTILPSTES-FTM/OFV1ECIOV
2ECIOV
MONITOR
When you are receiving while the squelch function is
ON, weak signals become intermittent.
Or, if the CTCSS function is ON, you may want to
disable the squelch function temporarily to monitor
the current channel activities.
In these cases, use the MONITOR function to disable
the squelch function temporarily.
To assign the MONITOR function to a [PF] key on the
front panel:
1 Press [MENU] and turn the MULTI/ CH control to
access Menu No. 51A.
2 Press [+]/ [–] to select RX MONI.
3 Press [MENU] to exit Menu mode.
Note: You can also assign the MONITOR function to a
programmable function key on an optional MC-47 microphone.
PF KEY
You can program the front panel [PF] key to assign a
function that you frequently use. The default is Voice
1 for the optional Voice Synthesizer, VS-3 {page 91}.
You can assign one of the functions in
“MICROPHONE PF KEYS” to this PF key, accessing
Menu No. 51A.
RISE TIME OF CW
The rise time of a CW signal is the time for the RF
output to rise to its maximum power after the key is
closed. The default setting, 6 ms, is fine for slow to
medium keying speed and normal weighting (dot/
dash ratio). The 4, 2 or 1 ms settings are good for
faster keying speeds.
1 Press [MENU], then turn the MULTI/ CH control to
access Menu No. 32.
2 Press [+]/ [–] to select the desired rise time
(default is 6 ms).
3 Press [MENU] to store the setting and exit Menu
mode.
LOCK FUNCTIONS
FREQUENCY LOCK FUNCTION
Frequency Lock disables some keys and controls to
prevent you from accidentally activating a function or
changing the current settings.
Press [FUNC], [ATT/ F LOCK] to toggle Frequency
Lock ON or OFF.
•“ ” appears when this function is ON.
The following keys and controls are disabled by
Frequency Lock:
gninuTgninuT
gninuT
gninuTgninuT lortnoc
HC/ITLUMHC/ITLUM
HC/ITLUM
HC/ITLUMHC/ITLUM
lortnoc
B/A
B=ALLACRLC
KSF/WCPSIDTNE
MA/MFOTUA/BSU/BSLNI.M
Ms OFV
OMEMKCIUQ
]NI.M[
OMEMKCIUQ
]RM[
LTASLES.GS/NACSTILPS
NWOD/PUM/OFVLES/zHM1
CER/1HC/1CER/2HC/2CER/3HC/3
PETS/ENIF/9–/+
Note:
◆
After activating Frequency Lock, the MULTI/ CH control and
[+]/ [–] are still available in Menu mode.
◆
After activating Frequency Lock, you can still change the transmit
frequency with the Tuning control while in TF-SET mode.
◆
After activating Frequency Lock, the MULTI/ CH control is still
available for selections other than frequency and memory
channel changes.
◆
After activating Frequency Lock, [CLR] may be available in some
situations.
LOCK ALL FUNCTION
The Lock All function disables all the keys and
controls on the TS-2000 transceiver, except [FUNC],
[PRE/ LOCK A], Mic [PTT] and [FUNC],
[ATT/ F LOCK].
Press [FUNC], [PRE/ LOCK A] to toggle between the
Lock All function ON or OFF.
•“ ” appears when this function is ON.
To return to normal operation, press [FUNC],
[PRE/ LOCK A].
MICROPHONE PF KEYS
When using the optional MC-47 or MC-52DM
microphone, you can customize the functions of the
Microphone PF1 (CALL), PF2 (VFO), PF3 (MR), and
PF4 (PF) keys. You can assign the following types of
functions to these keys via Menu Nos. 51B ~ 51E: