Kenwood VR-5090 DVR User Manual


 
78
Moving Around
Troubleshooting
I cant receive a radio station
Check that:
The appropriate antenna is connected. See Chapter One of the Con-
nections and Setup Guide.
The broadcast band is correct. See Radio Tuning on page 44 of
this manual.
The tuner is set to the correct frequency. See Radio Tuning on
page 44 of this manual.
Im getting a lot of static/interference
Check whether the receiver or antenna is too close to a TV or other
electrical appliance.
Adjust the antenna for best reception.
If you live in an area with weak FM signals, consider a rooftop FM
antenna (available at any home electronics store).
When I press a button to tune to a preset station, the receiver
does not respond
Check whether:
The receiver has been unplugged for more than three days. If it has,
your settings were cleared from the receivers memory. See My re-
ceiver wont turn on and the STANDBY indicator is flashing on
page 76 of this manual.
The Tuner input is selected. See Radio Tuning on page 44 of this
manual.
Receiver/Tuner