Filter
Top Products
English
12
Before Operation - VCR part
Tuning in a video channel on your
TV
Video channel (RF output channel) is the channel on
which your TV receives picture and sound signals from the
DVD+VCR through the RF cable.
If you have used a
SCART lead you will not have to tune
your TV, simply select the AV channel.The AV channel is
already pre-tuned for optimum video playback on your TV.
Perform the following steps only if interference appears in
the TV picture after you have moved to a different area or
a new station has started broadcasting in your area, or if
you change the connection from RF connection to AV
connection, or vise versa.
1
Turn on DVD+VCR and TV.
2
Set the vacant position 22 on your TV.
3
Press
11
on the remote control to enter the standby
mode (the clock indicator will be dimmed).
4
Press and hold REW or FWD on the
DVD+ VCR for more than 4 secs.
RF 36 will appear in the DVD+VCR display.
The following picture will be displayed on the TV screen.
If the picture is snowy, move to step 5. If the picture is
clean, press
11
on the DVD+VCR to finish.
5
Press REW or FWD on the DVD+VCR to set the
video channel to a vacant position between 22 and
68 which is not occupied by any local station in your
area.
Note
The RF channel will not change until step 6 has been
executed.
6
Press
11
to store the new RF video channel into the
DVD+VCR memory.
Now tune your TV set to the new DVD+VCR RF
channel.
Note
If the TV picture was clear in step 4, do not retune your
TV.
Using your DVD+VCR for the very first time
For the following steps we assume that you have just
connected your DVD+VCR for the very first time.
To make tuning TV stations an easy task your DVD+VCR
incorporates the Automatic Channel Memory System
(ACMS).This system will automatically tune and store TV
channels in your DVD+VCR.
1
Make sure that you have correctly installed your
DVD+VCR.
Press
11
to turn on your DVD+VCR.
If the initial Menu Screen doesn’t appear on screen,
make sure that you have tuned your TV to a video
channel. Or if this is correct it may mean that your
DVD+VCR is already tuned.
2
Press OK to start the automatic tuning process.
3
Press SYSTEM MENU to remove the menus from
the TV screen.
01 C02 00 PR-01
02 C03 00 PR-02
03 C04 00 PR-03
ES
i
Pr-12
ACMS
ACMS
D
OK
i
Pr-12
ACMS
i
RF CHANNEL 22
SET
P
R