Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
2
projectors and associated equipment—in any room (such as classrooms,
boardrooms, or auditoriums). They streamline operations and simplify
control by integrating audio, video, and computer-video sources into a
centralized system.
The Kramer Universal Room Controllers include:
An Ethernet port for configuration and control
1
Configurable backlit buttons
2
to set up any supported
3
command
Two bidirectional RS-232 wired serial ports, for universal display (for
example, projectors) and switcher control, and one RS-485 serial port
Two relays for the simplified and centralized control of room functions
(such as lighting, closing blinds, screen settings, and so on)
Up to four (2x2) IR emitters for IR control (for the RC-8IR and the
RC-6IR only)
An IR-learner for the customized control of external sources, receiving the
IR commands from different remote transmitters without the need for an
external IR remote control unit (for the RC-8IR and the RC-6IR only)
Macro mode operation, for programming up to 15 commands with the
press of a single button. The RC-8 and RC-8IR (that have eight buttons)
have a total of 120 commands; and the RC-6 and RC-6IR (that have six
buttons) have a total of 90 commands
Support for firmware upgrade
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise-
levels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances and position
your Kramer Universal Room Controllers away from moisture,
excessive sunlight and dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit
4
.
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
1 For example, control of switchers or amplifiers
2 Six buttons for the RC-6 and the RC-6IR, and eight buttons for the RC-8 and the RC-8IR
3 To be configured by the system integrator only
4 For example: model number AD2512C, part number 2535-000251