Kramer Electronics RC-8IR Universal Remote User Manual


 
Introduction
5
4.2 Your RC-8
The RC-8 is similar to the RC-8IR, without items 3 and 9 in Table 1.
4.3 Your RC-6IR
The RC-6IR is similar to the RC-8IR, just with 6 configurable control
buttons
1
(instead of 8).
4.4 Your RC-6
The RC-6 is similar to the RC-8 just with 6 configurable control buttons
1
(instead of 8).
5 Using Your Universal Room Controller
2
This user manual is applicable once the unit is installed and configured
3
. The
installation process is not detailed in this user manual
4
, and includes:
 Setting up the labels on the buttons, according to your specific
requirements
5
 Hardware installation
 Connecting the inputs and the display
 Configuration via the Windows®-based configuration software and/or
the IR learner
The universal room controller is very easy to use, as the example in Figure 3
and Table 3 defines
6
:
1 Item 4 in Table 1
2 From this section on, all the information is relevant to the RC-6, RC-8, RC-6IR and RC-8IR units, unless noted otherwise
3 By authorized Kramer technical personnel or by an external system integrator
4 Refer to the separate online guide at http://www.kramerelectronics.com
5 It is recommended to place labels on the buttons prior to installing the unit, as this involves removing the face plate
6 Your RC-8IR was installed and configured to suit your specific requirements. This example describes how to setup one of
an unlimited number of available setups for the system