Filter
Top Products
4. The System Diagnostics menu appears. Highlight
the LNB Type button and press SELECT.
5. Highlight “Stacked” from the pop-up submenu
and press SELECT.
6. With the LNB Type button still highlighted, press
SELECT and verify that a check mark appears
next to “Stacked.” Press SELECT again to exit.
7. Highlight the Install tab (shown on page 9.10).
8. Highlight the Dish Type button and press
SELECT.
54-0287
9.11
Troubleshooting
System Diagnostics
LNB Type
Unstacked
Stacked
LNB Type Submenu