Lenco Marine PL 4201 Flat Panel Television User Manual


 
25
Picture format
AUTO
Press PICTURE SIZE repeatedly until
AUTO appears. See above Note.
The broadcaster may send the signal which can set the picture-width automatically. If a TV-Channel was
received with automatic picture-width setting signal, then the picture-width can be changed to
corresponding format automatically, when AUTO had been selected. If you do not like this automatic
picture-width changing, select the other format.
Manual format setting
Press PICTURE SIZE repeatedly as you want.
4:3
It shows a 4:3-picture in original size with black bands on left
and right side.
FULL SCREEN
:
It shows a 4:3-picture in full screen-mode.
Note:
A screen is distorted as you approach the both ends of a
screen.
16:9
It corresponds for 16:9-format which comes from e.g. DVD or
from a SatReceiver or DVB-T receiver.
Note: The built-in tuner can not receive 16:9-format.
CINEMA:
It corresponds for 4:3-format with which black bars on top and
bottom, e.g. the built-in tuner can receive it.
Note:
In CINEMA mode, the top of the picture are slightly cut off.
To see the cut part, scroll the picture (see page 26).
14:9:
It shows a 4:3 picture in 14:9-format.
SUBTITLE SUBTITLE
SUBTITLE SUBTITLE
(CINEMA)
(16:9)
(FULL SCREEN)
(14:9)
Notes:
The PICTURE SIZE feature is not
available in the PC mode.
In HDMI mode, the PICTURE SIZE
feature is not available.
3U84011A [E] P19-25 20/12/05, 15:2125