Filter
Top Products
36
Connection to other equipment
3. Connecting an audio system
This connection allows you to hear the TV sound through external speakers connected to an audio
amplifier.
To control the audio through the amplifier, turn on the TV and the amplifier, set the volume of both to a
moderate level, and turn off the TV’s built-in speakers (see “Turning off the built-in speakers” on page
22). You will need one pair of standard audio cables.
Note:
If the volume of either the TV or the amplifier is set to 0 (or OFF), you will not hear any sound.
5. Setting of Scart socket AV2
1
In , select AV2 OUTPUT or AV2 INPUT.
2
In case of “AV2 OUTPUT”-selection
Press or to select TV or MONITOR.
TV: the latest channel position.
MONITOR: the picture displayed on TV-screen.
In case of “AV2 INPUT”-selection
Press
or to select AV or S-VIDEO.
AV: Composite signal (e.g. from VHS-Video
recorder).
S-VIDEO: S-Video signal (e.g. from DVD player with
S-Video output).
3
Press MENU repeatedly until the menu disappears.
Note: The sound adjustment
(see P.21) works only for the
TV-speaker. It is not effective
for the audio output socket.
4. Connect to a Video camera or Video player
Connect the Video camera (or Video player)
and TV-unit with a Special cable as described.
Press 0/AV of TV-remote control repeatedly
until AV4 appears.
Note:
If you have a camcorder with S-video, use an
S-video cable instead of a standard video
cable. Do not connect both a standard video
cable and an S-video cable at the same time,
or the picture performance will be unacceptable.
: RETURNMENU
: ADJUST: SELECT
: RETURNMENU
: ADJUST: SELECT
3U84011A [E] P35-BACK 20/12/05, 15:2236