Filter
Top Products
EXTERNAL EQUIPMENT SETUP
11
HD RECEIVER SETUP
This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do
receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
L R Y PB PR
When connecting Component cable
2
1
1. How to connect
Connect the audio output of the digital set-top box to
the CCOOMMPPOONNEENNTT((DDVVDD//DDTTVV))11 jacks on the set.
Connect the video outputs (Y, PB, PR) of the digital set
top box to the CCOOMMPPOONNEENNTT((DDVVDD//DDTTVV))11 jacks on
the set. Match the jack colors
(Y = green, PB = blue, and PR = red).
2
1
2. How to use
■
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.
operation)
■
Select CCoommppoonneenntt11 input source by using the TTVV//AAVV
button on the remote control.
■
If connected to CCOOMMPPOONNEENNTT((DDVVDD//DDTTVV))22 input,
select CCoommppoonneenntt22 input source.
■
To prevent the equipment damage, never plug in any power cords until you have finished connecting all
equipment.
Signal
480i
480p
720p
1080i
Component 1/2
Yes
Yes
Yes
Yes
HDMI1/DVI,
HDMI2
No
Yes
Yes
Yes