Filter
Top Products
EXTERNAL EQUIPMENT SETUP
17
When connecting with a RCA cable
Connect the VVIIDDEEOO11 jacks between TV and VCR. Match
the jack colors (Video = yellow, Audio Left = white, and
Audio Right = red)
1. How to connect
2. How to use
■
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
■
Select AAVV11 input source by using the TTVV//AAVV button on
the remote control.
■
If connected to VVIIDDEEOO33, select AAVV33 input source.
When connecting with an S-Video cable
Connect the audio outputs of the VCR to the AAUUDDIIOO
IINN jacks on the set.
Connect the S-VIDEO output of the VCR to the
SS--VVIIDDEEOO input on the set.
1. How to connect
2. How to use
■
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
■
Select SS--VVIIDDEEOO input source by using the TTVV//AAVV but-
ton on the remote control.
1
2
1
1
1 2
G
The picture quality is improved: compared to normal
composite (RCA cable) input.
NOTE
G
Do not connect to both Video and
S-Video at the same time. In the
event that you connect both
Video and the S-Video cables, only
the S-Video will work.
CAUTION