Filter
Top Products
COMMERCIAL MODE
56
COMMERCIAL MODE
CLONING CONNECTIONS/TEACHING SETUP
- Connections for the LT2002 to Teach another 26LH1DC3/4/5 the Master Setup
Teaching the Master Setup to Another 26LH1DC3/4/5
Teach Master 26LH1DC3/4/5’s Setup to the target
26LH1DC3/4/5
After learning is complete, remove the M.P.I. cable from the
master 26LH1DC3/4/5 and connect it to the target
26LH1DC3/4/5 that you want to copy the master
26LH1DC3/4/5’s setup into. With “THE CLONE HAS
CONTROL OF TV” message displayed, press 2 to go to the
“TEACH TO TV” option, press ON/OFF, POWER, or ENTER.
Select the LT2002 memory that the new setup is in. Press
On/Off to transfer the new setup and other information to
the new 26LH1DC3/4/5. Teaching usually takes 2-3
minutes.
After the “TEACHING COMPLETE” message is displayed,
press any button to return to the Clone menu, then press
ON/OFF, POWER, or ENTER. If finished, detach M.P.I. cable
from the target, newly cloned 26LH1DC3/4/5.
Disconnect 26LH1DC3/4/5 Power for 15 Seconds
Unplug the AC power cord of the newly cloned
26LH1DC3/4/5 from the power outlet for about 15 seconds
to activate the newlycopied setup.
Clone Programmer
Master 26LH1DC3/4/5
Ferrite Core
(TDK, ZCAT
2035-0930)
Antenna
or CATV
CLONE SELECTION MENU
(1) LEARN FROM TV
(2) TEACH TO TV
(3) SET CLONE CLOCK FROM TV
(4) SET TV CLOCK FROM CLONE
(5) DISPLAY TV SETUP
(6) DISPLAY CLONE SETUP
-TO CHANGE MENU ITEMS, PRESS
CHANNEL KEYS OR DIGITS.
-TO EXECUTE ITEM, PRESS ON/OFF,
POWER, OR ENTER
TEACHING IN PROGRESS,
PLEASE WAIT
TEACHING COMPLETE
This menu should appear after any key is
pressed on the Installer remote.
This display will appear during Teaching
function.
This display will appear after Teaching is
complete.