LG Electronics RCRPS06GR Universal Remote User Manual


 
16
IMPORTANT: Because this remote controls more
than one device, you must fi rst “tell” the remote
which device you wish to operate. That means, if
you wish to operate your TV, you must fi rst press
the TV key to put the remote in the TV Mode. The
remote stays in that device mode until you press
a different device key. For example, if your remote
is in TV Mode and you want to operate the DVD
player, you must press the DVD key to change
device modes.
Backlighting
Backlight illumination helps you see the remote
control keys better in the dark. You can turn
backlight illumination on or off by pressing the
backlight key (
). Backlighting stays on as long as
keys are being pressed and turns off four seconds
after the last keypress. If the backlight illumination
is on, and you press the backlight key, the backlight
turns off.
Advanced Functions
Master Power
Each time you press the POWER key, this remote
automatically turns on and off the devices you’ve
programmed it to operate. This feature, called
“Master Power” must be enabled by device.
Programming the Master Power Key
1. Press and hold the P key for 3 seconds until the
LED indicator turns on and stays on.
2. Release the P key.
3. Press the device key you want to add to the
power macro.
4. Press the CH + key and the LED blinks.
5. The LED stays on.
6. Follow steps 3 and 4 to add more devices to
Master Power.
7. When all devices are added Press VOL + key to
enable Master Power.
8. Press the P key to complete the process.
Note: To remove a device in above process use
the CH - key.
To disable Master Power:
1. Press and hold the P key for 3 seconds. The
POWER key comes on.
2. Press VOL- to disable Master Power.
3. Press the P key to confi rm. The POWER key
now turns only the device you’re currently
controlling on and off.