Filter
Top Products
20
1
TV CODE
5
SAT•CBL•STREAM CODE
4
AUDIO CODE
DVR•AUX1 CODE
DVD
TV
SAT/CBL
AUDIO
DVR/VCR
VCR•AUX2 CODE
DVD
TV
SAT/CBL
AUDIO
DVR/VCR
3
DVD CODE
TIPS: All TV codes start with the number 1; all
VCR and DVR codes start with the number 2; all
DVD player codes, the number 3; all audio device
codes, the number 4; and all satellite receiver,
cable box, and digital TV converters, the number
5.
To exit the Code Retrieval Mode at any time, press
the EXIT•BACK key.
If you press an invalid key during the Code
Retrieval process, the remote will not respond. If
you do not press a valid Code Retrieval key (TV,
DVD, SAT•CBL•STREAM, DVR•AUX1, VCR•AUX2,
AUDIO, INFO, EXIT•BACK), Code Retrieval times
out after 15 seconds. The POWER key blinks four
times, and then turns off.
1. Press and hold the device key (TV, DVD,
SAT•CBL•STREAM, DVR•AUX1, VCR•AUX2, or
AUDIO) whose code you wish to retrieve. The
POWER key illuminates. Keep pressing the
device key.
2. While holding the device key down, press and
hold the P key. The POWER key illumination
turns off. After holding down both keys for
three seconds, it turns back on.
3. Release both keys. The POWER key remains
illuminated.
4. Starting with the number 1 key, press and
release each number key on the keypad in
the following order: 1-9, then 0. The number
that causes the POWER key to blink is the fi rst
number of the code. As you fi nd each number of
the code, write it down for future reference. Then
start with the number 1 key again.
5. Repeat step 4 until you have retrieved all fi ve
numbers in the code. After the fi fth number is
retrieved, the POWER key blinks briefl y, then
turns off.