LG Electronics RCRPS06GR Universal Remote User Manual


 
22
3. Wait until the POWER key turns on and stays on.
Then release both keys. The remote is now in
Learning mode.
4. On the learning remote, press the key you want
to use for the learned function. The illuminated
POWER key blinks once, then remains on.
5. On the original remote, press and hold the key
you want to teach to the universal remote. Wait
until the POWER key on the learning remote
blinks once, then release the key on the original
remote. The learning remote has fi nished
learning this key.
Note: If a problem occurs during the Learning
process, the illuminated POWER key blinks four
times, but the unit remains in the Learning mode.
If this occurs, adjust the distance between the
remotes slightly and repeat from step 4.
6. To learn another key for this device mode:
Repeat steps 4 and 5 for the key you want to learn.
To learn keys in a different device mode:
Repeat steps 2–5 for the next device mode.
To save learned keys and exit learning: press
any device key (like TV) on the learning remote.
Learning Tips
Make sure the batteries in both the learning and
original remote(s) are fresh.
Incandescent or low-energy light can cause
interference with IR transmissions. When using
the Learning function, keep remotes at least
three feet away from such light sources.
Make sure the original remote is in the same
mode as the universal remote so that the
Learned key is assigned to the correct mode.
You cannot learn any commands on the device,
macro, exit, preset and backlight keys.
If you use the VOL+/- keys to learn new
functions, the volume control will not adjust the
volume in the Volume Punch Through mode.
To exit the Learning mode press any device key.
The remote exits Learning mode if it has run
out of memory to store new learned keys.
To ensure that your units are compatible and
to increase your familiarity with the Learning
process, experiment by learning two or three
keys initially. Then, carry out a Master Clear
before learning all the desired functions from
your original remote.