Filter
Top Products
25
ENGLISH
Deleting a Macro
1. Press and hold the MACRO key until the
POWER key turns on and remains on.
2. Press the EXIT•BACK key. The POWER key
blinks once, then remains on.
3. Press the number key (1–8) where the macro
you want to delete is stored. The POWER key
blinks once, then remains on.
4. Press the OK / ENTER key to confi rm the Macro
Clear operation. The POWER key stays on for 2
seconds, then turns off. The selected Macro is
deleted.
Note: If you do not press the OK / ENTER key
within 15 seconds (or if you press a different key),
the POWER key blinks four times and turns off. The
remote exits macro deletion mode, and no changes
are made to existing Macros.
5. Repeat steps 1-4 for any other existing Macros
to be cleared.