Loewe A 32 Flat Panel Television User Manual


 
36
Operating additional equipment
Connecting other audio amplifiers or active
speakers
In the connection wizard, select “HiFi/AV amplifier“ under “Equipment
selection: audio component“. The connection wizard allows configuration
of different audio amplifiers (stereo amplifiers, surround amplifiers,
analogue or digital) with different sound formats (Dolby Digital, dts, MPEG
and Stereo/PCM). Refer to the operating instructions for the audio amplifier
to be connected.
Select “Digital“ under “Audio transmission“ for digital audio amplifiers.
Connect the digital audio output of the TV AUDIO DIGITAL OUT to the
digital audio input of the digital amplifier.
Assign the digital audio input to the socket through which the
corresponding picture is transmitted (e.g. AV2 if a DVD player is connected
there). Then the digital sound is passed to the digital audio output of the
TV set and fed to the external audio amplifier via this.
Specify which sound formats can be decoded with your digital amplifier
(Dolby Digital, MPEG, dts).
Specify under “Type of amplifier“ whether the digital amplifier is a stereo or
surround amplifier.
If it is a surround amplifier, specify whether or not the TV loudspeakers
are to be used as centre loudspeakers. Connect the centre output of the
amplifier to the centre output of the TV using a cinch cable, if necessary.
Note: do not use the centre loudspeaker connection on the amplifier;
instead use the pre-amplifier centre output.
Select “Analogue“ for “Sound transmission“ for analogue audio amplifiers.
The sound for the analogue amplifier is transmitted via the AUDIO OUT L/R
connections of the TV to the audio amplifier. Connect the amplifier with
two cinch cables.
Specify under “Type of amplifier“ whether the analogue amplifier is a stereo
or surround amplifier.
If it is a surround amplifier, also specify whether or not the TV speakers
are to be used as centre loudspeakers. Connect the centre output of the
amplifier to the centre output of the TV using a cinch cable, if necessary.
Note: do not use the centre loudspeaker connection on the amplifier;
instead use the pre-amplifier centre output.
If you want to listen to the sound over the TV loudspeakers temporarily, call
the Sound menu using the
button, select “Sound via“ and then “TV“.
When connecting active speakers, select “Active speakers“ in the
connection wizard under “Equipment selection: audio component“.
The sound for the active speakers is transmitted via the AUDIO OUT
L/R connections to the active speakers. Make connections to the active
speakers using the cinch cables.
Make the audio settings on the TV set when active speakers are connected.
When using an external audio amplifier, make the audio settings on the
audio amplifier.
PREOUT
FR
FL
SL SR SUB
C
LL
RR
AUX1 IN
DIGITAL
IN
DIGITAL
OUT
AUX OUT AUX 2
AUDIO IN
C
AUDIO DIGITAL
OUT
AV2
PREOUT
FR
FL
SL SR SUB
C
LL
RR
AUX1 IN
DIGITAL
IN
DIGITAL
OUT
AUX OUT AUX 2
AUDIO IN
C
AUDIO OUT
L R