Filter
Top Products
38
Operating additional equipment
Sound from PC or Set Top Box
Feed the analogue audio signal from the PC or the STB to the sockets
AUDIO IN L/R on the TV via a cinch cable. The sound is reproduced via the
TV speakers.
If you have connected a digital external audio amplifier, you can select the
digital audio signal in the connection wizard (TV menu - Connections -
New devices/modifications) and assign it to the VGA/XGA socket. You
can make the other settings for the audio amplifier as described for digital
amplifiers on page 36. The digital audio signal of the Set Top Box is fed in
at the AUDIO DIGITAL IN socket on the TV. Feed the digital audio signal
from the TV AUDIO DIGITAL OUT to the amplifier.
Component video connection
If you have a DVD player/recorder with Component OUT
connections, you can connect it to the SD/HD-COMPONENT
IN sockets of the TV instead of to the Euro-AV sockets. The
connecting cable with three cinch plugs each transmits
picture information. The playback is of a better quality than via the Euro-AV
socket.
You need another cinch cable for the analogue sound transmission.
Connect the analogue audio outputs of the DVD player to the AUDIO IN
L/R sockets on the TV set. The sound is reproduced via the TV speakers.
If you want to use the digital sound of the DVD player with a digital audio
amplifier connected to the TV, make a connection between AUDIO DIG
OUT of the DVD player and AUDIO DIGITAL IN of the TV set.
Log in the component/device in the connection wizard:
Assign the AUDIO DIG IN input here to the COMP. IN socket, provided a
digital audio amplifier is also connected. You can make the other settings
for the audio amplifier as described for digital amplifiers on page 36.
Set the signal at the component input in the connection wizard: Set to
“Automatic“ first. If the signal is not reproduced when playback is started,
consult the operating instructions of the DVD device connected to find out
what screen resolution is possible (SDTV, HDTV or ProScan).
Select the component connection in the AV selection.
Call AV selection
Select COMP. IN sockets and use ...
to call.
Start playback on the connected device.
Set geometry
Call the TV menu using the MENU button, select “Geometry“ using
and set:
If the picture is not positioned correctly, you can move the picture
horizontally and vertically here so that it fills the whole screen. You can
also set the phase position so that the picture appears in the best possible
quality.
OK
VIDEOCOMP. IN
AVS
VGA/XGA
DVD
D
MI/DVI
HD
M
AV selection
VCR
OK
OK
AV