Loewe 46, 40 Flat Panel Television User Manual


 
13 -
Positioning/aligning DVB-T antenna
If you are receiving one or more DVB-T stations with picture and sound
interference then you should change the installation location and align
-
ment of the antenna. Ask your dealer to tell you which channels are used
to broadcast the DVB-T stations in your region.
In normal TV mode, without other displays.
A DVB-T station is received and selected.
Call
TV menu.
34 Select Settings,
6go to the menu line below.
34 Select Stations,
6go to the menu line below.
34 Select Manual adjustment,
OK call manual adjustment.
The signal source is already on DVB-T due to the station
preselection.
Position and align the antenna in such a manner that
maximum values for
C/N and Level are obtained.
Blue button: Start search.
Search for DVB-T stations one after another and compa
-
re values for
C/N and Level.
Then position/align the antenna to the weakest station
so that maximum values for
C/N and Level are obtained.
Thereafter perform an automatic search for all DVB-T
stations, see page 22.
Explanation of the setting possibilities:
Depending on the selected channel and country the
associated bandwidth of 7 or 8 MHz will be set auto
-
matically.
Initial installation
Operating convenience
General information on menu operation
Use the MENU button to call menus for the various modes. Additional
menus can be called directly with the remote control.
The menus are displayed at the bottom of the screen. At the top you get
additional information about the selected menu item (see info display
on page 14).
In normal TV mode, without other displays.
Call
TV menu.
Example: Selecting and executing functions
34 Select Picture,
6go to the menu line below.
34 Select Brightness,
6go to the menu line below.
34 Set Brightness.
Go to the Brightness menu line
to make other picture settings.
34 Select more ... ,
OK call more ... functions.
34 Select Auto format,
6go to the menu line below.
34 Select on / off.
Conclude the settings.
Inputs via numeric buttons
Letters have to be entered for specific functions. Like
using a mobile phone keypad (1 to 9), press a numeric
button until the desired character appears.
The available letters are imprinted on the individual
numeric buttons.
END
INFO
Sound
Connections
Recording SettingsPicture
TV menu
Picture adjustment ...
Picture
Here you can adjust among other things: Contrast, colour, brightness, picture
adjustment, sharpness, picture format.
Bandwidth
END
INFO
Manual adjustment
Signal source DVB-T DVB-C DVB-S A
Channel E05
Frequency 177.50 MHz
Bandwidth 7 MHz
Name 12 Test
C/N 96 Level 99
Overwrite station
Search
Signal source
Select the area in which you want the broadcaster to search here. You can
use the button to automatically select station by station.