Filter
Top Products
10
5. Press
MENU to unconfigure the sensor and return to the Bus Devices
list, where the temp you unconfigured (Water Temp) will be listed as
Uncfg Temp.
6. Highlight
OUT T (Outside Temp) and press MENU. The configuration
options menu will appear.
7. Select
RECONFIG and press MENU to open the Selecting Temp menu.
Highlight
WATER and press MENU. You will be directed to the Bus
Devices list.
8. Highlight
UNCFG TEMP and press MENU. The following message will
appear: Hit Menu to Cfg Temp Sns.
9. Press
MENU to be taken to the Selecting Temp menu. Choose OUTSIDE
and press
MENU. You will be directed to the Bus Devices list, where the
two sensors will be listed with their new configuration names.
If desired configuration name available:
1. Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and
press
MENU.
2. Highlight
B. DEVICES and press MENU, which will open the Bus Devices
list.
3. Highlight
WTR TEMP on the Bus Devices list and press MENU, which
will launch the Configuration Options menu.
4. Select
RECONFIG and press MENU to open the Selecting Temp menu.
Highlight
OUTSIDE and press MENU. You will be directed to the Bus
Devices list, where the temp will now be shown as Out T. (Outside
Temp).
NOTE:
If your temp sensor is not updated on the Bus Devices list, refresh
the list by letting it time out and then access it again.
Displaying EP-80R Temp Sensor Data
You can display your temperature sensor data on the Gauge, Single
Digital and Dual Digital pages.
Page Screen Rotation
The Page Screen Rotation consists of multiple pages that have been set
for display. Once pages have been added to the rotation, they can be set
to scroll across the screen automatically or manually. Press the
UP and
DOWN keys to manually scroll pages across the screen. Pressing the UP
key moves the scroll in one direction. Pushing the
DOWN key moves the
scroll in the other direction. You can use Autoscroll if you want the